Replacement Battery Charger for Sony CR2

• Fully charge/discharge Sony CR2 battery up to 4 cycles before achieving full capacity of a new Sony CR2 battery
• Fully discharge and then fully charge the Sony CR2 battery every two to three weeks for battery conditions.
• Run the device under the Sony CR2 battery's power until it shuts down or until you get a low battery warning. Then recharge the Sony CR2 battery as instructed in the user's manual.
• Remove from the device and stored in a cool, dry, clean place if the Sony CR2 battery will not be in use for a month or longer.
• Recharge the Sony CR2 battery after a storage period.
• Ensure maximum performance of the Sony CR2 battery by optimizing the device's power management features. Refer to the manual for further instructions.

• Do not short-circuit. A short-circuit may cause severe damage to the Sony CR2 battery.
• Do not drop, hit or otherwise abuse the Sony CR2 battery as this may result in the exposure of the cell contents, which are corrosive.
• Do not expose the Sony CR2 battery to moisture or rain.
• Keep Sony CR2 battery away from fire or other sources of extreme heat. Do not incinerate. Exposure of battery to extreme heat may result in an explosion.

Breaking In New Sony CR2 Batteries - new Sony CR2 batteries come in a discharged condition and must be fully charged before use. It is recommended that you fully charge and discharge your new Sony CR2 battery two to four times to allow it to reach its maximum rated capacity.

Preventing the Memory Effect - Keep your Sony CR2 battery healthy by fully charging and then fully discharging it at least once every two to three weeks. Exceptions to the rule are Li-Ion batteries which do not suffer from the memory effect.

Keep Your Sony CR2 Batteries Clean - It's a good idea to clean dirty battery contacts with a cotton swab and alcohol. This helps maintain a good connection between the battery and your portable device.

Exercise Your Sony CR2 Battery - Do not leave your Sony CR2 battery dormant for long periods of time. We recommend using the Sony CR2 battery at least once every two to three weeks. If a Sony CR2 battery has not been used for a long period of time, perform the new battery break in procedure described above.

Sony CR2 Battery Storage - If you don't plan on using the Sony CR2 battery for a month or more, we recommend storing it in a clean, dry, cool place away from heat and metal objects. NiCad, NiMH and Li-Ion batteries will self-discharge during storage; remember to break them in before use. Sealed Lead Acid (SLA) batteries must be kept at full charge during storage. This is usually achieved by using special trickle chargers. If you do not have a trickle charger, do not attempt to store SLA batteries for more than three months.

Want to see more battery FAQ ?